Primary tabs
Degreaser Heavy Duty
What is a Heavy Duty Degreaser?
A Heavy Duty Degreaser (like RXSOL DEGREASER HD) is a powerful alkaline or solvent-based cleaner formulated to remove - Grease, Oil, Carbon residues, Fuel and tar deposits, Heavy dirt and grime
Heavy Duty Degreaser is Excellent for removal of oil and grease. Readily soluble in water in all proportions. It is a unique formulation blended from inorganic, organic compounds and detergents with powerful dispersing agents and aliphatic petroleum distillates. It is non-corrosive to metal like copper, aluminium, mild steel and plastic. It is non-toxic which makes handling easy.
Ideal for use where chlorinated solvents are undesirable or prohibited.
Where You Can Use RXSOL Heavy Duty Degreaser: Engine rooms, Ship decks and bilges, Industrial floors, Workshop equipment, Cargo hold cleaning, Oil-stained concrete and machinery
Complete removal of dirt, oil, carbonised grease, heavy oil , gum, vegetable oil, lube oil, soot, asphalt, carbon stains etc. Gives clear finish to the surface. Excellent for use as a wash for fuel tankers & as a liquid steam jenny compound.
Specialized & Treated for the really tough daily cleaning problems faced in the proper Maintenance of Industrial and Institutional physical plants. Can be used as a stripper for all types of waxes and finishes and as a Degreaser where regular cleaners will not perform. May be brushed on, sprayed or used in a dip tank . Excellent for use as a wash for fuel tankers & as a liquid steam jenny compound.
How to Use RXSOL HEAVY DUTY DEGREASER?
Step-by-Step Instructions:
Dilution (if required):
For heavy contamination: use undiluted or 1:1 with water
For general cleaning: 1:5 to 1:20 (chemical:water) depending on surface and soil level
RXSOL HEAVY DUTY DEGREASER Application Methods:
Spray, brush, or mop directly onto the greasy surface, Can also be applied using a foam gun or pressure washer
Soaking Time:
Allow the degreaser to sit for 5–15 minutes
For thick grease or carbon, give it more dwell time but don’t let it dry
Agitate (Optional):
Scrub with a brush for stubborn areas to enhance effectiveness
Rinse:
Rinse thoroughly with high-pressure water (freshwater or hot water for best results)
Depending upon contamination 2-25% with fresh water.
It is an extremely versatile heavy duty cleaner suitable for use in soak tanks, high pressure washers, Automated Scrubbing machines and for manual use.
RXSOL-10-1005-025 is easily soluble in water Action is quite fast even at low temperature which gives advantages of cleaning under operation And avoid shut down and down time.
Non corrosive to most of the metals / plastics.
Gives clear finish to the surface .
Lower cost due to high concentration
Use undiluted for heavily soiled component
PROEDURE OF USE:-
1st Method:-
Mix 1 part of RXSOL-10-1005-025 with 2 -10 parts of water / GAS-OIL , For heavy oil,greasy surface use directly)Spray directly on the entire surface to be cleaned. This can be achieved by Hand spray / mechanical spray pump. Immediately after 2 -5 minute of spray the RXSOL-10-1005-025 starts its function. The Dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water (High pressure recommended). Dirt and mud starts vanishing with cleaning media and water.
2nd Method:-
Application in immersion process with or without ultrasonic support, manual wipping.
3rd Method:-
RXSOL-10-1005-025 is also used in conjunction with alkaline degreasing bath at 3-5% (v/v) concentration for better and quick degreasing action. Eithers the bath is heated to be 70c or the solution can be stirred or air agitated.