Drilling Fluids & Mud Oil Field chemicals-81

Iron Control

Corrosion Inhibitor Intensifier Hytemp O intensifier can be used from ambient temperature up to 400°F in Acidic medium like HCl / HF-based fluids.

Film forming type, corrosion inhibitor. The dosing rate of corrosion inhibitor shall be 6-12 ppm (g/m3) based on the flow rate of product being transported through the pipelines.

Effective as a flocculant in various liquid/solid separation applications, such as clarification, dissolved air flotation, and sludge dewatering of inorganic sludges.

It is an effective, non-discoloring stabilizer that provides excellent long-term heat stability by preventing thermo-oxidative degradation during processing and service life.

Suitable for Oilfield applications include well conformance, cementing, treatment/remediation, and enhanced oil recovery.

Power of Chemical to break EMULSION in two phase hydrocarbon phase (oil) and a water-phase. Dosage and application will vary based on emulsion characteristics. For most crude or fuel oil based emulsions, a starting concentration of 0.1% at 165°F with a minimum heated recirculation contact time of 2

The fine particle-size-distribution of zinc carbonate results in a maximum amount of surface area for fast, efficient sulfide scavenging and is effective in water-base and oil- or synthetic-base fluids.

Water soluble demulsifier is a totally organics surfactants solution with water and soluble in crude oil for the demulsification of oil in water,

Dolomite Exporter